Learn how to safely operate the laser cutting and engraving equipment at Delmarva Makerspace using LightBurn software.
This class combines essential laser safety instruction with practical demonstrations of equipment operation and project preparation.
Topics covered
- Laser hazards and safety procedures
- Approved and prohibited materials
- Ventilation and fire prevention
- Introduction to LightBurn
- Preparing designs for cutting and engraving
- Machine setup, focusing and operation
- Emergency procedures and shutdown
This training is a prerequisite for authorized independent use of the makerspace’s laser equipment. Basic computer literacy is recommended.
Registration Information
- Active Delmarva Makerspace Members: FREE
- Non-Members: $45 per participant
- Class Capacity: 10 participants
- Registration: Advance registration is required.
If the class is full, join the waitlist to receive notification when space becomes available.
Non-members are welcome to participate in scheduled training sessions. Completion of training does not include membership or independent access to Delmarva Makerspace equipment.
Safety Requirements
Closed-toe shoes and appropriate clothing are required. Participants must follow all posted safety guidelines and instructor directions. Additional personal protective equipment may be required depending on the equipment being used.
Learn how to safely operate the laser cutting and engraving equipment at Delmarva Makerspace using LightBurn software.
This class combines essential laser safety instruction with practical demonstrations of equipment operation and project preparation.
Topics covered
- Laser hazards and safety procedures
- Approved and prohibited materials
- Ventilation and fire prevention
- Introduction to LightBurn
- Preparing designs for cutting and engraving
- Machine setup, focusing and operation
- Emergency procedures and shutdown
This training is a prerequisite for authorized independent use of the makerspace’s laser equipment. Basic computer literacy is recommended.
Registration Information
- Active Delmarva Makerspace Members: FREE
- Non-Members: $45 per participant
- Class Capacity: 10 participants
- Registration: Advance registration is required.
If the class is full, join the waitlist to receive notification when space becomes available.
Non-members are welcome to participate in scheduled training sessions. Completion of training does not include membership or independent access to Delmarva Makerspace equipment.
Safety Requirements
Closed-toe shoes and appropriate clothing are required. Participants must follow all posted safety guidelines and instructor directions. Additional personal protective equipment may be required depending on the equipment being used.
Learn how to safely operate the laser cutting and engraving equipment at Delmarva Makerspace using LightBurn software.
This class combines essential laser safety instruction with practical demonstrations of equipment operation and project preparation.
Topics covered
- Laser hazards and safety procedures
- Approved and prohibited materials
- Ventilation and fire prevention
- Introduction to LightBurn
- Preparing designs for cutting and engraving
- Machine setup, focusing and operation
- Emergency procedures and shutdown
This training is a prerequisite for authorized independent use of the makerspace’s laser equipment. Basic computer literacy is recommended.
Registration Information
- Active Delmarva Makerspace Members: FREE
- Non-Members: $45 per participant
- Class Capacity: 10 participants
- Registration: Advance registration is required.
If the class is full, join the waitlist to receive notification when space becomes available.
Non-members are welcome to participate in scheduled training sessions. Completion of training does not include membership or independent access to Delmarva Makerspace equipment.
Safety Requirements
Closed-toe shoes and appropriate clothing are required. Participants must follow all posted safety guidelines and instructor directions. Additional personal protective equipment may be required depending on the equipment being used.
Learn how to safely operate the laser cutting and engraving equipment at Delmarva Makerspace using LightBurn software.
This class combines essential laser safety instruction with practical demonstrations of equipment operation and project preparation.
Topics covered
- Laser hazards and safety procedures
- Approved and prohibited materials
- Ventilation and fire prevention
- Introduction to LightBurn
- Preparing designs for cutting and engraving
- Machine setup, focusing and operation
- Emergency procedures and shutdown
This training is a prerequisite for authorized independent use of the makerspace’s laser equipment. Basic computer literacy is recommended.
Registration Information
- Active Delmarva Makerspace Members: FREE
- Non-Members: $45 per participant
- Class Capacity: 10 participants
- Registration: Advance registration is required.
If the class is full, join the waitlist to receive notification when space becomes available.
Non-members are welcome to participate in scheduled training sessions. Completion of training does not include membership or independent access to Delmarva Makerspace equipment.
Safety Requirements
Closed-toe shoes and appropriate clothing are required. Participants must follow all posted safety guidelines and instructor directions. Additional personal protective equipment may be required depending on the equipment being used.
Learn how to safely operate the laser cutting and engraving equipment at Delmarva Makerspace using LightBurn software.
This class combines essential laser safety instruction with practical demonstrations of equipment operation and project preparation.
Topics covered
- Laser hazards and safety procedures
- Approved and prohibited materials
- Ventilation and fire prevention
- Introduction to LightBurn
- Preparing designs for cutting and engraving
- Machine setup, focusing and operation
- Emergency procedures and shutdown
This training is a prerequisite for authorized independent use of the makerspace’s laser equipment. Basic computer literacy is recommended.
Registration Information
- Active Delmarva Makerspace Members: FREE
- Non-Members: $45 per participant
- Class Capacity: 10 participants
- Registration: Advance registration is required.
If the class is full, join the waitlist to receive notification when space becomes available.
Non-members are welcome to participate in scheduled training sessions. Completion of training does not include membership or independent access to Delmarva Makerspace equipment.
Safety Requirements
Closed-toe shoes and appropriate clothing are required. Participants must follow all posted safety guidelines and instructor directions. Additional personal protective equipment may be required depending on the equipment being used.
Learn how to safely operate the laser cutting and engraving equipment at Delmarva Makerspace using LightBurn software.
This class combines essential laser safety instruction with practical demonstrations of equipment operation and project preparation.
Topics covered
- Laser hazards and safety procedures
- Approved and prohibited materials
- Ventilation and fire prevention
- Introduction to LightBurn
- Preparing designs for cutting and engraving
- Machine setup, focusing and operation
- Emergency procedures and shutdown
This training is a prerequisite for authorized independent use of the makerspace’s laser equipment. Basic computer literacy is recommended.
Registration Information
- Active Delmarva Makerspace Members: FREE
- Non-Members: $45 per participant
- Class Capacity: 10 participants
- Registration: Advance registration is required.
If the class is full, join the waitlist to receive notification when space becomes available.
Non-members are welcome to participate in scheduled training sessions. Completion of training does not include membership or independent access to Delmarva Makerspace equipment.
Safety Requirements
Closed-toe shoes and appropriate clothing are required. Participants must follow all posted safety guidelines and instructor directions. Additional personal protective equipment may be required depending on the equipment being used.
Learn how to safely operate the laser cutting and engraving equipment at Delmarva Makerspace using LightBurn software.
This class combines essential laser safety instruction with practical demonstrations of equipment operation and project preparation.
Topics covered
- Laser hazards and safety procedures
- Approved and prohibited materials
- Ventilation and fire prevention
- Introduction to LightBurn
- Preparing designs for cutting and engraving
- Machine setup, focusing and operation
- Emergency procedures and shutdown
This training is a prerequisite for authorized independent use of the makerspace’s laser equipment. Basic computer literacy is recommended.
Registration Information
- Active Delmarva Makerspace Members: FREE
- Non-Members: $45 per participant
- Class Capacity: 10 participants
- Registration: Advance registration is required.
If the class is full, join the waitlist to receive notification when space becomes available.
Non-members are welcome to participate in scheduled training sessions. Completion of training does not include membership or independent access to Delmarva Makerspace equipment.
Safety Requirements
Closed-toe shoes and appropriate clothing are required. Participants must follow all posted safety guidelines and instructor directions. Additional personal protective equipment may be required depending on the equipment being used.
Discover how to turn digital designs into physical objects with our introductory 3D printing class at Delmarva Makerspace.
This beginner-friendly session introduces the fundamentals of filament-based 3D printing, from preparing a digital model to operating a 3D printer safely.
Topics covered
- Introduction to 3D printing technology
- Finding and preparing printable models
- Slicing software and print settings
- Filament selection and loading
- Printer operation and safety
- Common printing problems and troubleshooting
No previous 3D printing experience is required.
Registration Information
- Active Delmarva Makerspace Members: FREE
- Non-Members: $45 per participant
- Class Capacity: 10 participants
- Registration: Advance registration is required.
If the class is full, join the waitlist to receive notification when space becomes available.
Non-members are welcome to participate in scheduled training sessions. Completion of training does not include membership or independent access to Delmarva Makerspace equipment.
Discover how to turn digital designs into physical objects with our introductory 3D printing class at Delmarva Makerspace.
This beginner-friendly session introduces the fundamentals of filament-based 3D printing, from preparing a digital model to operating a 3D printer safely.
Topics covered
- Introduction to 3D printing technology
- Finding and preparing printable models
- Slicing software and print settings
- Filament selection and loading
- Printer operation and safety
- Common printing problems and troubleshooting
No previous 3D printing experience is required.
Registration Information
- Active Delmarva Makerspace Members: FREE
- Non-Members: $45 per participant
- Class Capacity: 10 participants
- Registration: Advance registration is required.
If the class is full, join the waitlist to receive notification when space becomes available.
Non-members are welcome to participate in scheduled training sessions. Completion of training does not include membership or independent access to Delmarva Makerspace equipment.
Discover how to turn digital designs into physical objects with our introductory 3D printing class at Delmarva Makerspace.
This beginner-friendly session introduces the fundamentals of filament-based 3D printing, from preparing a digital model to operating a 3D printer safely.
Topics covered
- Introduction to 3D printing technology
- Finding and preparing printable models
- Slicing software and print settings
- Filament selection and loading
- Printer operation and safety
- Common printing problems and troubleshooting
No previous 3D printing experience is required.
Registration Information
- Active Delmarva Makerspace Members: FREE
- Non-Members: $45 per participant
- Class Capacity: 10 participants
- Registration: Advance registration is required.
If the class is full, join the waitlist to receive notification when space becomes available.
Non-members are welcome to participate in scheduled training sessions. Completion of training does not include membership or independent access to Delmarva Makerspace equipment.